Effects of graphene polymer nano composite coating on corrosion resistance of ASTM A106 carbon steel pipe

Authors

  • Adiba Rhaodah Andsaler Universiti Teknologi Malaysia
  • Wilver Philip Universiti Teknologi Malaysia
  • Izman Sudin Universiti Teknologi Malaysia
  • Mohd Zamri Mohd Yusop Universiti Teknologi Malaysia

DOI:

https://doi.org/10.11113/mjfas.v16n4.1931

Abstract

Wide application prospects of graphene in the corrosion protection coatings field are owing to its excellent mechanical properties, outstanding chemical stability, corrosion resistance, and high corrosion resistance. Anti-corrosion composite was prepared using multilayer graphene powder as a filler and epoxy resin in this work to investigate the effect of graphene compositions in the zinc-rich epoxy (ZRE) as the modified anti-corrosion coating for carbon steel pipe. Using SEM for morphology along with the electrochemical performance was associated with changed content composite coating of graphene and pure epoxy resin coating. The measurement for open-circuit potential (OCP), the potentiostat polarization curve (Tafel Plot), and the electrochemical impedance spectroscopy (EIS) of the coating were conducted in order to investigate the influence of additional of graphene on the basic properties and corrosion resistance. From the experimental results, the increasing content of graphene led by the increasing value of OCP as the test system was stable, also the coating of high content graphene sustained a moderately high OCP ability with the increase of immersion time. From the results in the industrial environment, 0.1wt% Graphene + 99.9wt% ZRE in a 240μm coating layer would be sufficient as the corrosion rate is 0.0087204mmpy and three times lower compare to 100wt% ZRE. In a nutshell, the addition of graphene improves the impenetrability of the composite coating.

Author Biographies

Adiba Rhaodah Andsaler, Universiti Teknologi Malaysia

School of Mechanical Engineering, Faculty of Engineering

Wilver Philip, Universiti Teknologi Malaysia

School of Mechanical Engineering, Faculty of Engineering

Izman Sudin, Universiti Teknologi Malaysia

School of Mechanical Engineering, Faculty of Engineering

Mohd Zamri Mohd Yusop, Universiti Teknologi Malaysia

Advanced Membrane Technology and Research Centre

References

Radoman, T. S., Dzunuzovic, J. V., Jeremic, K. B., et al. 2014, Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters. J. Mater. Des., 62:158-167.

Hao, Y., Liu, F., Han, E. H. 2013, Protection of epoxy coatings containing polyaniline modified ultra-short glass fibers. J. Prog. Org. Coat., 76: 571-580.

Pour-Ali, S., Dehghanian, C., Kosari, A. 2014, ‘In situ synthesis of polyaniline–camphor sulfonate particles in an epoxy matrix for corrosion protection of mild steel in NaCl solution. J. Corros. Sci., 85: 204-214.

Chmielewska, D., Sterzynski, T., Dudziec, B. 2014, Epoxy composites cured with aluminosilsesquioxanes: Thermomechanical properties. J. Appl. Polym. Sci., 131: 40672.

Urbaniak, M. 2011, A relationship between the glass transition temperature and the conversion degree in the curing reaction of the EPY (R) epoxy system. Polymer. J, 56: 240-243.

Oleksy, M., Oliwa, R., Heneczkowski, M., et al. 2012, Composites of epoxy resin with modified bentonites for aviation industry. J. Polymer, 57: 228-235.

Liao, Z., Zhang, T., Qioa, S., Zhang, L. 2017, Preparation and electrochemical properties of graphene/ epoxy resin composite coating. IOP Conf. Series: Earth and Environmental Science.

Ilkhani, Ahamed. 2013, Corrosion protection of carbon steel by using Zinc-Rich inorganic water-based silicate coating comprising different amounts of nano-silica. International Journal of Chemistry, 75-82.

Akinci, A., Yilmaz, F. 2011, The effect of epoxy polyester sealing of sprayed-metal coatings for additional corrosion protection. Ant- Corrosion Methods and Materials, 26-30.

El-Shazly, A. H., Al Turaif, H. A. 2012, Improving the corrosion resistance of buried steel by using polyaniline coating. International Journal of Electro-Chemical Science, 211-221.

Novoselov, K. S., Geim, A. K., Morozov, S. V., et al. 2004, Electric field in atomically thin carbon films. Science, 306(5696): 666–669.

Georgakilas, V., Perman, J. A., Tucek, J., Zboril, R. 2015, Broad family of carbon nanoallotropes: Classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures. Chem Rev., 115:4744-4822.

Slonczewski, J., Weiss, P. 1958, Band structure of graphite. Phys. Rev. 109:272.

Singh, V., Joung, D., Zhai, L., Das, S., Khondaker, I., Seal, S. 2011, Graphene-based materials: Past, present and future. Prog. Mater Sci., 56(8): 1178-1271.

Geim, A. K., Novoselov, K. S. 2007, The rise of graphene. Nat. Mater., 6, 183–190.

Pradip, G., Soga, T., Tanemura, M., Zamri, M., Jimbo, T., Katoh, R., Sumiyama, K. 2009, Vertically aligned carbon nanotubes from natural precursors by spray pyrolysis method and their field emission properties. Journal Applied Physics A., 94;1, pp. 51-56.

Xingyu, W., Xiaoning, Q., Zhibin, L., Dante B. 2018, Graphene reinforced composites as protective coatings for oil and gas pipelines. Nanomaterials (Basel), 8(12):1005.

Chiong, S., Goh, P., Ismail A. 2017, Novel hydrophobic PVDF/APTES-GO nanocomposite for natural gas pipelines coating. J. Nat. Gas Sci. Eng., 42:190–202.

Samimi, A. 2012, Use of polyurethane coating to prevent corrosion in oil and gas pipelines transfer. Int. J. Innov. Appl. Stud., 1:186-193, 2028-932.

Matjaz F., Jennifer J. 2014, Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A Review. Corrosion Science, 86;17-41.

Roseman, M., Martin, R., Morgan, G. 2016, Composites in offshore oil and gas applications. Marine Applications of Advanced Fibre-Reinforced Composites, 233–257.

Wang, D., Bierwagen, G. P. 2009, Sol-gel coatings on metals for corrosion protection. Ptograss in Organic Coatings, 64;4, 327-338.

Gray, J. E., Luan, B. 2002, Protective coatings on magnesium and its alloys-a critical review. Journal of Alloys and Compounds, 336;1-2, 88-113.

Downloads

Published

26-08-2020